Ambersil DP200, 400ML Cleaner, Silicone Release, Dry Film, Industrial

DP 200 is a semi-permanent silicone release agent. This specialist air curing, dry film which provides a long lasting semi-permanent release coating. It is based on a high percentage mixture of silicone resins and provides a highly durable release film for many polymer types, natural and synthetic rubber and rotational moulding grades of Polythylene. Application areas such as cures on exposure to air and forms a semi-permanent coating which acts as an effective release agent in the rotational moulding industry. Also highly useful for moulding processes and materials where a durable, long lasting release film is required. Can be used as mould seal or as a base coat for the subsequent application of other Ambersil mould release agents.

• Mfr. Part No.: 31538
• 400ml fill size
• Clear, colourless liquid appearance
• Rolls Royce Item 116061, approved supplier 176 specifications/approvals
• SG at 25°C is 0.7
• Pressure at 25°C is 4bar
• Discharge rate is 1.0g/sec
• operational temperature range up to 200°C
• Recommended solvents such as Amberklene FE10, ME20 or L030
• Soluble in solvents, insoluble in water
• Classified as extremely flammable under current EC regulations
• Stored at normal ambient temperatures and has a shelf life of not less than 6 years with correct storage. 
• Aerosols should always be stored below 50°C, away from direct heat and naked flame.