CLIFF PM1 Component Preforming Machine
The components may be fed in bandolier form (assuming a 5 mm pitch between components or multiple thereof) or loose by means of the built in hopper.
Finished components are collected in a standard size storage box.
A separate plinth is supplied to raise the height of the machine by 80 mm where it is not practical to site the handle over the edge of a bench.
All adjustments are carried out on top of the machine using the built-in scales. Components are cut and formed without scoring or damaging the leads.
General construction features an anodised aluminium body with heavy steel sides. The free-running blades are 35 mm diameter and produced in M2 high speed steel. The cutting and bending wheels are in high carbon steel - all are hardened and tempered as appropriate.
The bandolier drum supports have lugs which latch into keyhole slots on the sides of the machine allowing the drum to sit over the machine when in use. This system takes up less space and allows a gravity feed of components into the machine.
The machine will cut and form a comfortable and effortless 40,000 components per hour. Guards are fitted all round the cutting and bending wheels for protection of fingers.
RoHS Exempt
Product Specifications
| Specification | 596-100 |
|---|---|
|
Description
|
Component Preforming Machine |